20lb Propulsion Outboard Motor 2000W 36V Waterproof Brushless Motor

Product Description

20lb Propulsion Outboard Motor 2000W 36V Waterproofing Brushless Motor

Outrunner brushless motor E7068 impermeable motor features:

Outline dimensions:

What is the differences between inrunner brushless motor and outrunner brushless motor?

The difference between the inner rotor and the outer rotor is that it rotates inside or outside. Usually the rotating part is the part embedded with magnets, and the non-rotating part is the coil part. In the case of the same rotor weight, the rotational inertia of the inner rotation is not as large as that of the outer rotation, so the kv high torque of the inner rotation is low, and the outer rotation is just the opposite. The internal rotation motor has small torque and high speed, and is generally used as a vehicle model (such as a car, ship and helicopter). The outer rotor motor has better heat dissipation. If the inner rotating motor burns out, the brushless motor will be difficult to maintain, because it is impossible to wind the enameled wire by itself, and the outer rotating motor can be repaired by yourself. What is the difference between an outer rotor brushless motor and an inner rotor brushless motor?

1. For brushless motors of the same level (outer diameter), the torque of the outer rotor motor is larger than that of the inner rotor in the power-on test. The parameters obtained are: the value of 800KV for the outer rotor motor and the value of 1000-2000KV for the inner rotor motor.

2. The speed of the inner rotor motor is higher than that of the outer rotor motor. Since the characteristics are related to the KV value, according to the definition, the idling speed of the brushless motor is "KV value multiplied by the input voltage", which proves the speed of the inner rotor motor. higher than the outer rotor brushless motor.

3. In terms of torque characteristics, the KV value reflects the torque performance of the motor to a certain extent. The no-load top speed of the outer rotor motor test is normal, and the DC brushless motor, but after adding a load (such as a propeller), its top speed drops to no-load. 60%-70% of top speed.

4. In the test of the inner rotor motor of the same level, the rotating speed with load can only reach 30%-40% of its no-load speed. The capacity of the inner rotor motor with load is relatively low. In order to satisfy the torque work, the inner rotor motor must be Decrease the speed and increase the passing current, so that the output power of the motor increases when the voltage remains unchanged. This torque characteristic of the inner rotor motor is also reflected in specific applications.